English
E-U1LM200-XX Series Linear Motor Stages

Iimveliso

E-U1LM200-XX Series Linear Motor Stages Featured Image
  • E-U1LM200-XX Series Linear Motor Stages
  • E-U1LM200-XX Series Linear Motor Stages

E-U1LM200-XX Series Linear Motor Stages

Inkcazelo emfutshane:

E-U1LM200 Precision Linear Stage

Isantya esiphezulu kunye nokuchaneka kweMagnetic Direct Direct Drive

● Uluhlu lokuhamba ukuya kwi-800 mm

● Isantya ukuya kuthi ga kwi-2 m/s

● i-encoder yokuma ene-100 nm isisombululo okanye i-analog ye-1vpp ene-4.88nm isisombululo

● Ukuchaneka okuphezulu kunye ne-encoder yomgca: Ubuncinci bokunyuka kwentshukumo 100 nm

● Ukuchaneka okuphezulu kwesikhokelo

● Uyilo oluqinileyo olunobubanzi obuyi-200 mm


Iinkcukacha zeMveliso

INGCACISO

FAQ

Iithegi zeMveliso

I-E-U1LM200-XX uchungechunge luyindleko ye-industrial linear motor displacement platform eveliswe yi-PRECISION-STAGE yethu, linqanaba elihambelanayo kwipotfoliyo yalo yezisombululo zemizi-mveliso ezinomthamo ophezulu womthwalo kunye namandla aphezulu.Uyilo lwayo luhlala lujolise kwiimeko ezifunwayo zemizi-mveliso kwaye luphawulwa ngokuqina okuphezulu kunye nokusetyenziswa kwezixhobo ezikumgangatho ophezulu: Ukujikeleza kwakhona izikhokelo zebhola, i-3-phase linear motor, incremental linear encoder.Isisombululo esiphezulu se-encoders sivumela ukusebenza kakuhle kokulandela umkhondo, iimpazamo ezincinci zokulandela umkhondo, kunye namaxesha amafutshane okulungisa.Iziqhagamshelo ezihambelana neshishini zibonelela ngonxibelelwano olukhawulezayo nolukhuselekileyo.Iqonga lokushukuma elikhethiweyo libonelela ngeenzuzo ngokukodwa kwi-XY okanye i-XYZ indibaniselwano.

I-Magnetic Direct Drive

U1LM200-XXX-02

Amanqanaba amathathu okuqhuba ngokuthe ngqo kwemagnethi akusebenzisi malungu omatshini kwi-drivetrain kwaye adlulisele amandla okuqhuba ngokuthe ngqo kwiqonga elishukumayo ngaphandle kokukhuhlana.Iidrive zivumela isantya esiphezulu kunye nokunyuka okuphezulu.Iinjini ze-Ironcore zilungele ukubeka imisebenzi enemfuno ephezulu kakhulu yokuchaneka, kuba azinxibelelani kakubi noomazibuthe abasisigxina.Oku kubangela ukubaleka okugudileyo nakwizantya ezisezantsi kwaye kwangaxeshanye, akukho ngcangcazelo ngesantya esiphezulu.Ukuziphatha okungahambisani nomgca wolawulo kuyaphetshwa kwaye indawo nganye ilawulwa ngokulula.Amandla okuqhuba anokumiselwa ngokungenamkhethe.

Uyilo lokusika uMphetho

Iibheringi zebhola ezijikelezayo kolu luhlu zibonelela ngomthamo ophezulu womthwalo we-dynamics ephezulu kuneempawu ezikhuphisanayo.Isisombululo esiphezulu se-encoder siphumela ekusebenzeni kakuhle kokulandela umkhondo, iimpazamo ezincinci zokulandela umkhondo kunye namaxesha angcono okuzinzisa.Ukuze ube bhetyebhetye kakhulu, iikhowudi ezongezelekayo nezipheleleyo ziyafumaneka.Iikhowudi ezipheleleyo zibonelela ngolwazi lwendawo engacacanga, enceda ukumisela indawo ngoko nangoko.Oku kuthetha ukuba akukho kubekwa kwindawo efunekayo ngexesha lokutshintsha, ukwandisa ukusebenza kakuhle kunye nokhuseleko ngexesha lokusebenza.

Uyilo lokusika uMphetho

U1LM200-XXX-01

Ukusika i-Laser, ukuskena, ukuprintwa kwedijithali, ukudibanisa kunye nokuhlolwa kwamacandelo e-elektroniki, i-AOI (ukuhlolwa kwe-automated optical), i-automation, i-flat screen production.Izicelo ezineemfuno eziphezulu kwi-dynamics, ukuchaneka, intshukumo yokuskena egudileyo, ixesha elifutshane lokuzinzisa kunye nephutha eliphantsi lokulandela umkhondo.

  • Ngaphambili:
  • Okulandelayo:

    • Inkcazo

    U1LM200-100

    -200

    -300

    -400

    -500

    -600

    -800

    Izakhono ezisebenzayo [mm]

    100

    200

    300

    400

    500

    600

    800

    Isisombululo se-Incoder ye-Optical [nm]

    		 I-100nm (ubungakanani bedijithali obuqhelekileyo) kwezinye iimodeli ezikhethiweyo ze-Opticval Encode isisombululo okanye ubungakanani be-analog ye-1vpp

    Ukuphinda-phinda [nm]

    		 ≤±0.5um

    Ukubeka ukuchaneka

    		 Ingalungelelaniswanga ±4um/100mm (ngaphantsi kwe ±1.5um emva kolungelelwaniso)

    Ukuthe tye [um]

    ±1.5

    ±2.5

    ±3.5

    ±4

    ±5

    ±6.5

    ±8

    Ukucaba um]

    ±1.5

    ±2.5

    ±3.5

    ±4

    ±5

    ±6.5

    ±8

    I-Motor thrust

    		 I-132N eqhubekayo / incopho ye-232N

    Isantya esiphezulu

    		 2m/s

    Isantya esiphezulu

    		 3G

    Ukuhambisa ubunzima

    		 6.5kg

    Umthamo wokuLayisha-Horizonta[kg]

    		 40kg

    Umthamo womthwalo-icala [kg]

    		 20kg

    E-U1LM200 Precision Linear Stage

    1) Yintoni "Nanopositioning"?

    A: Kwixesha elidlulileyo elingekude kakhulu, ukuchaneka komsila-isiphelo sentsimbi yentsimbi kwi-automation yayihlala ibizwa ngokuba yi-colloquially ebizwa ngokuba yi-"micropositioning" yecandelo lemarike.Igama elithi microposition livela kwinto yokuba iinkqubo zokubeka ezichanekileyo eziphezulu zazisebenza rhoqo kwinqanaba le-micron.Abavelisi kwesi sithuba bachaza iimpawu eziphambili zenkqubo ezifana nokuphindaphinda kwe-Bi-directional, Ukuchaneka, kunye noZinzo kwiiyunithi ze-microns.Iinkqubo ezinjalo zizalise ngokwaneleyo iimfuno zeshishini ukusuka kwiNzululwazi yoBomi kunye neDiagnostics, ukuya kwi-non-contact metrology, kumacandelo eTekhnoloji yeSemiconductor, uGcino lweDatha, kunye neFlat Panel Display.

    Ukukhawuleza ukuya kumhla wethu kwaye iinkqubo ezinjalo azisekho ngokwaneleyo.Iimfuno zeshishini eziphuhlayo kwi-microscope kunye ne-biotechnology ifuna ukuguquka kwamanqanaba okusebenza ukusuka kubenzi bezixhobo zokubeka ngokuchanekileyo.Njengoko iimpawu zomdla kuzo zonke iimarike ziba zincinci, ukukwazi ukubeka kwinqanaba le-nanometer kuba yinto efunekayo kwimarike.

    2) Ngaba imveliso yakho ithunyelwa phesheya?

    A: Ewe, sithumela iimveliso zethu kumazwe ngamazwe kwaye sinabasasazi kwiindawo ezichongiweyo.

    3) Ndiyicela njani isicatshulwa kwimveliso ethile?

    A:Ungasithumela i-imeyile, siya kukwenza ikowuteshini esemthethweni kuwe.

    4) Ngaba iimveliso ziyakwazi ukwenziwa?

    A: We ibonelela ngezona zisombululo zentshukumo zobunjineli bokugqibela kubathengi bethu.Kwiimeko ezininzi oku kubandakanya ukwenza okanye ukumisela iimveliso zethu ezisemgangathweni kwisicelo esikhethekileyo somthengi kunye neenkcukacha.Nceda uqhagamshelane nathi ukuba unomdla wokwenza okanye ulungiselele enye yeemveliso zethu eziqhelekileyo, okanye ukuba ungathanda ukusebenza neqela lethu lobunjineli ukuyila isisombululo esisodwa ukuhlangabezana neemfuno zakho zomthombo wengxelo.Ukuba esi santya sigqithile, ukuqaliswa kotshintsho akusasebenzi, kwaye uhlengahlengiso kufuneka luqaliswe kwakhona.

    5)Yintoni izigaba zegantry?

    A: Izigaba ze-gantry ziyilelwe ukubonelela ngokuphindaphinda okungenakulinganiswa kunye nokugqithisa okugqwesileyo phantsi kweemeko zokusebenza zehlabathi lokwenene.Izigaba zethu ze-gantry ziyilelwe ukuhambisa izinto ezinje ngeekhamera zokuhlola, iintloko ze-laser, okanye isixhobo esithile sabathengi ngaphezu kwee-substrates ezisuswayo okanye izixhobo ezifakwe kwisiseko senkqubo.Isiseko se-gantry sinokubonelelwa ngemingxuma yokunyuka yokudibanisa i-hardware yomthengi kwinqanaba.Ngenxa yokulula kunye nokulula ukuhlanganisana, yinto efanelekileyo yokumisela isigaba se-gantry se-OEMS kunye nabadibanisi benkqubo oomatshini bokwakha abafuna izicelo.Uninzi lweemveliso eziqhelekileyo ze-Dover Motion ze-screw driven kunye ne-servo motor linear zinokudityaniswa kunye njengenqanaba le-gantry ukufezekisa ukuchaneka okufunekayo kwesicelo kunye nokuhamba ngesindululo se-XYZ.

    ● Isiseko esenziwe kwangaphambili ukuze kube lula ukuhlanganisa;

    ● Iziphakamisi zokubonelela ngesithuba phakathi kwesiseko kunye nomqadi oshukumayo;

    ● Iingoma zentambo ezidibeneyo kunye ne-hi flex cable;

    ● Zonke ii-axes zivavanywe kunye kwaye zatshiswa ukuze kuqinisekiswe ukusebenza kunye neemfuno zokuthembeka zihlangatyezwa phambi kokuthunyelwa.

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    iimveliso ezinxulumene

    Cofa u-enter ukukhangela okanye i-ESC ukuvala